- Type (ball bearings)
- With 2 ball rows
- Outer diameter
- 90
- Inner diameter
- 50
- Thickness
- 20
- Hole type (bearings)
- Tapered
- Shaft (bearings)
- Without overflow
- Width on shaft
- 20
- Tightening type (bearings)
- Tightening with clamp sleeve
- Greasing (bearings)
- No
- Sealing (bearings)
- Without sealing
- Number of ball rows
- 2
- Clearance class
- C3
- Unit
- Mm
- Line (ball bearings)
- 1000
- Additionnal information
- Roulement qui se monte avec un manchon de serrage
- Référence
- 0002374960
- Référence
- 01109302
- Référence
- 1210EKTN9/C3
- Référence
- 1210KTNC3
- Référence
- 340403646
- Référence
- 746866
- Référence
- 80746866
- Référence
- 84018859
- Référence
- D41603800
- Référence
- JD10436
- Référence
- LA00169083
- Référence
- LA340403646
- CASE IH
- CT 5050, CT 5060, CT 5070, CT 5080
- CLAAS
- COMMANDOR 228 CS, DOMINATOR 100, DOMINATOR 105, DOMINATOR 106, DOMINATOR 108, DOMINATOR 108 MAXI, DOMINATOR 108 S, DOMINATOR 108 SL, DOMINATOR 108 VX, DOMINATOR 116 CS, DOMINATOR 118, DOMINATOR 118 MAXI, DOMINATOR 128 VX, DOMINATOR 130, DOMINATOR 140, DOMINATOR 150, DOMINATOR 48, DOMINATOR 56, DOMINATOR 58, DOMINATOR 66, DOMINATOR 68, DOMINATOR 76, DOMINATOR 76 H, DOMINATOR 78, DOMINATOR 78 AL, DOMINATOR 78 H, DOMINATOR 78 S, DOMINATOR 80, DOMINATOR 85, DOMINATOR 86, DOMINATOR 88, DOMINATOR 88 CLASSIC, DOMINATOR 88 DS, DOMINATOR 88 MAXI, DOMINATOR 88 S, DOMINATOR 88 SL, DOMINATOR 88 VX, DOMINATOR 96, DOMINATOR 98, DOMINATOR 98 CLASSIC, DOMINATOR 98 DS, DOMINATOR 98 MAXI, DOMINATOR 98 S, DOMINATOR 98 SL, DOMINATOR 98 VX, MEDION 310 (932), MEDION 320 (932), MEDION 330 (932), MEDION 330 H (931), MEDION 340 (934), TUCANO 320 (832), TUCANO 320 (C18), TUCANO 320 (L32/L42), TUCANO 330 (832), TUCANO 330 (C18), TUCANO 340 (834), TUCANO 340 (C03), TUCANO 340 (C20), TUCANO 340 (C26), TUCANO 340 (L03/L13), TUCANO 340 (L33/L43)
- DEUTZ-FAHR
- 4060 H TOPLINER, 4065 H TOPLINER, 4065 HTS, 4068 H TOPLINER, 4070 H TOPLINER, 4075 H TOPLINER, 4075 HTS, 4080 H TOPLINER, 4080 HTS, 4085 HTS, 4090 H TOPLINER, 4090 HTS, 5660 HTS, 5670 HTS, 5680 HTS, 5690 HTS, 5695 HTS
- DRONNINGBORG
- 9000
- FENDT
- 5220, 5250, 5250 AL, 5255 L, 5255 L MCS, 5270 C, 5275 C, 5275 C PL, 5275 C PLI, 6270 L, 6275 L, 6275 L MCS, 6280, 6280 C, 6300 C, 6335 C, 6335 C PL, 8350
- FIAT
- L 516, L 517, L 518, L 519 AL, L 520, L 521, L 523, L 524, L 525, L 624, L 625, L 626, L 627
- JOHN DEERE
- 1155, 1157, 1158, 1166, 1166 S II Hydro 4, 1169, 1169 H, 1169 Hydro 4, 1170, 1174, 1174 H, 1177, 1177 H, 1177 Hydro 4, 1177 S II, 1188, 1188 H, 1188 Hydro 4, 1188 S II, 1188 S II Hydro 4, 1450 CWS, 1450 CWS II, 1550 CWS, 2054, 2056, 2058, 2064, 2066, 2254, 2256, 2258, 2264, 2266, 2266 EXTRA, 9780 CTS, CTS, CTS II, T 550 GEN 1, T 560 GEN 1, T 660 GEN 1, T 670 GEN 1, W 540 GEN 1, W 550 GEN 1, W 650 GEN 1, W 660 GEN 1, WTS 9540, WTS 9540 i, WTS 9560, WTS 9560 i, WTS 9580, WTS 9580 i, WTS 9640, WTS 9640 i, WTS 9660, WTS 9660 i, WTS 9680, WTS 9680 i
- LAVERDA
- 1950, 2050, 2150 LXE, 2350, 2350 LS, 255 AL, 255 LCS, 255 LCS LS, 2550 LXE, 2550 LXE LS, 256 LCS, 2560, 2760, 2760 LS, 2760 LX, 2760 LX MCS, 286 LCS, 296 LCS, M 300, M 300 MCS, M 304, M 304 LS, M 304 LXE, M 305, M 305 LXE, M 305 SP POWER, M 306, M 306 LS, M 306 LXE, M 306 SP POWER, M 310, M 310 MCS, M 400, M 400 LC, M 400 LCI, M 410, M 410 LC, REV 256
- MASSEY FERGUSON
- 7250, 7252, 7254, 7256, 7272, 7274, 7276, ACTIVA 7246, ACTIVA S 7345, ACTIVA S 7345MCS, ACTIVA S 7347, ACTIVA S 7347MCS, BETA 7260, BETA 7260 AL, BETA 7265, BETA 7270, BETA 7270 AL, BETA 7360, BETA 7360 PL, BETA 7360 PLI, BETA 7370, BETA 7370 PL, CEREA 7256, CEREA 7272, CEREA 7274, CEREA 7278, MF 30, MF 32, MF 34, MF 36, MF 38, MF 38 XP, MF 40
- NEW HOLLAND
- 8050, 8055, 8060, 8070, 8080, AL 59, CS 640, CS 660, TC 56, TX 30, TX 32, TX 34, TX 36, TX 62, TX 63, TX 64, TX 64+, TX 65, TX 65+, TX 66, TX 67, TX 68, TX 68+
- Type (ball bearings)
- With 2 ball rows
- Outer diameter
- 90
- Inner diameter
- 50
- Thickness
- 20
- Hole type (bearings)
- Tapered
- Shaft (bearings)
- Without overflow
- Width on shaft
- 20
- Tightening type (bearings)
- Tightening with clamp sleeve
- Greasing (bearings)
- No
- Sealing (bearings)
- Without sealing
- Number of ball rows
- 2
- Clearance class
- C3
- Unit
- Mm
- Line (ball bearings)
- 1000
- Additionnal information
- Roulement qui se monte avec un manchon de serrage
- Référence
- 0002374960
- Référence
- 01109302
- Référence
- 1210EKTN9/C3
- Référence
- 1210KTNC3
- Référence
- 340403646
- Référence
- 746866
- Référence
- 80746866
- Référence
- 84018859
- Référence
- D41603800
- Référence
- JD10436
- Référence
- LA00169083
- Référence
- LA340403646
- CASE IH
- CT 5050, CT 5060, CT 5070, CT 5080
- CLAAS
- COMMANDOR 228 CS, DOMINATOR 100, DOMINATOR 105, DOMINATOR 106, DOMINATOR 108, DOMINATOR 108 MAXI, DOMINATOR 108 S, DOMINATOR 108 SL, DOMINATOR 108 VX, DOMINATOR 116 CS, DOMINATOR 118, DOMINATOR 118 MAXI, DOMINATOR 128 VX, DOMINATOR 130, DOMINATOR 140, DOMINATOR 150, DOMINATOR 48, DOMINATOR 56, DOMINATOR 58, DOMINATOR 66, DOMINATOR 68, DOMINATOR 76, DOMINATOR 76 H, DOMINATOR 78, DOMINATOR 78 AL, DOMINATOR 78 H, DOMINATOR 78 S, DOMINATOR 80, DOMINATOR 85, DOMINATOR 86, DOMINATOR 88, DOMINATOR 88 CLASSIC, DOMINATOR 88 DS, DOMINATOR 88 MAXI, DOMINATOR 88 S, DOMINATOR 88 SL, DOMINATOR 88 VX, DOMINATOR 96, DOMINATOR 98, DOMINATOR 98 CLASSIC, DOMINATOR 98 DS, DOMINATOR 98 MAXI, DOMINATOR 98 S, DOMINATOR 98 SL, DOMINATOR 98 VX, MEDION 310 (932), MEDION 320 (932), MEDION 330 (932), MEDION 330 H (931), MEDION 340 (934), TUCANO 320 (832), TUCANO 320 (C18), TUCANO 320 (L32/L42), TUCANO 330 (832), TUCANO 330 (C18), TUCANO 340 (834), TUCANO 340 (C03), TUCANO 340 (C20), TUCANO 340 (C26), TUCANO 340 (L03/L13), TUCANO 340 (L33/L43)
- DEUTZ-FAHR
- 4060 H TOPLINER, 4065 H TOPLINER, 4065 HTS, 4068 H TOPLINER, 4070 H TOPLINER, 4075 H TOPLINER, 4075 HTS, 4080 H TOPLINER, 4080 HTS, 4085 HTS, 4090 H TOPLINER, 4090 HTS, 5660 HTS, 5670 HTS, 5680 HTS, 5690 HTS, 5695 HTS
- DRONNINGBORG
- 9000
- FENDT
- 5220, 5250, 5250 AL, 5255 L, 5255 L MCS, 5270 C, 5275 C, 5275 C PL, 5275 C PLI, 6270 L, 6275 L, 6275 L MCS, 6280, 6280 C, 6300 C, 6335 C, 6335 C PL, 8350
- FIAT
- L 516, L 517, L 518, L 519 AL, L 520, L 521, L 523, L 524, L 525, L 624, L 625, L 626, L 627
- JOHN DEERE
- 1155, 1157, 1158, 1166, 1166 S II Hydro 4, 1169, 1169 H, 1169 Hydro 4, 1170, 1174, 1174 H, 1177, 1177 H, 1177 Hydro 4, 1177 S II, 1188, 1188 H, 1188 Hydro 4, 1188 S II, 1188 S II Hydro 4, 1450 CWS, 1450 CWS II, 1550 CWS, 2054, 2056, 2058, 2064, 2066, 2254, 2256, 2258, 2264, 2266, 2266 EXTRA, 9780 CTS, CTS, CTS II, T 550 GEN 1, T 560 GEN 1, T 660 GEN 1, T 670 GEN 1, W 540 GEN 1, W 550 GEN 1, W 650 GEN 1, W 660 GEN 1, WTS 9540, WTS 9540 i, WTS 9560, WTS 9560 i, WTS 9580, WTS 9580 i, WTS 9640, WTS 9640 i, WTS 9660, WTS 9660 i, WTS 9680, WTS 9680 i
- LAVERDA
- 1950, 2050, 2150 LXE, 2350, 2350 LS, 255 AL, 255 LCS, 255 LCS LS, 2550 LXE, 2550 LXE LS, 256 LCS, 2560, 2760, 2760 LS, 2760 LX, 2760 LX MCS, 286 LCS, 296 LCS, M 300, M 300 MCS, M 304, M 304 LS, M 304 LXE, M 305, M 305 LXE, M 305 SP POWER, M 306, M 306 LS, M 306 LXE, M 306 SP POWER, M 310, M 310 MCS, M 400, M 400 LC, M 400 LCI, M 410, M 410 LC, REV 256
- MASSEY FERGUSON
- 7250, 7252, 7254, 7256, 7272, 7274, 7276, ACTIVA 7246, ACTIVA S 7345, ACTIVA S 7345MCS, ACTIVA S 7347, ACTIVA S 7347MCS, BETA 7260, BETA 7260 AL, BETA 7265, BETA 7270, BETA 7270 AL, BETA 7360, BETA 7360 PL, BETA 7360 PLI, BETA 7370, BETA 7370 PL, CEREA 7256, CEREA 7272, CEREA 7274, CEREA 7278, MF 30, MF 32, MF 34, MF 36, MF 38, MF 38 XP, MF 40
- NEW HOLLAND
- 8050, 8055, 8060, 8070, 8080, AL 59, CS 640, CS 660, TC 56, TX 30, TX 32, TX 34, TX 36, TX 62, TX 63, TX 64, TX 64+, TX 65, TX 65+, TX 66, TX 67, TX 68, TX 68+
-
Recently viewed products
My fleet
Expertise, reliability, and innovation
The products in the LANDA range embody our expertise and our commitment to providing solutions designed and manufactured by our teams, in accordance with rigorous and precise specifications. Thanks to our complete control over the production chain, we guarantee reliable, durable parts that are perfectly suited to our customers' needs.
Producing under our own brand name allows us to highlight our core business: combining technical expertise and manufacturing quality. Each product is the result of strict quality control and a constant desire to offer the best, in complete transparency.
The proximity of our French industrial partners contributes greatly to this: the vast majority of our products are manufactured in France.
Choosing LANDA means choosing trust and lasting quality.
Any questions? Not sure about a reference?
Contact our team by phone or via our form. We will help you quickly find the right part for your machine.
Contact a LANDA expert
Certified quality
Landa
Over 8,000 products
manufacturer quality in stock
Fast delivery
A team at your side
before, during, and after your purchase